A Scratch Built RC Plane for HD FPV cameras #2

Another video from www.mikeysrc.com

Little pet project of mine. I wanted to build a collapsible RC plane that I could take to remote locations to film interesting scenery. I scaled up my Sport Trainer design http://mikeysrc.com/Sport-Trainer.html and put two motors on it on the sides so I could put the camera in the middle.

Stay tuned for more videos from cameras on board this plane.

Construction materials. Foam board / poster board / foam core / depron. Popsicle sics, BBQ skewers, carbon fiber rod, packing tape and hot glue.

Planes uses either one 2200mah 11.1V lipo or 2 1300mah 11.1V lipos.
2 1000KV motors,
2 10 X 6 GWS direct drive style props.
2 40 amp esc’s
4 servos
Video Rating: / 5

How to use 3 FPV cameras on one RC FPV plane and instantly switch video feeds between 3 cameras for even great FPV flight experience, is something one must learn to do. In this video I will show you the mini Cam Switcher and how handy this little piece of electronics available from various FPV sources is. Also I will show you how to make proper connections and how to use it with your Radio to switch video feed instantly between 3 cameras. Later I will put it on an FPV Plane or Multirotors with 3 different cameras. I plan to use GoPro Hero 3, and two other cameras where one will be connected to OSD and I will switch feeds between these cams during flight to let you experience a total new feeling of FPV. Enjoy this video tutorial and Review.

http://onlyflyingmachines.com
http://onlyflyingmachines.com/product-category/multirotors/
http://onlyflyingmachines.com/product-category/pnp_fpv_combos/

Comments and feedback welcome at alishanmao@gmail.com , info@onlyflyingmachines.com and alishanmaolife@gmail.com Don’t forget to visit http://www.onlyflyingmachines.com , and Subscribe to http://www.youtube.com/alishanmaolife and http://www.youtube.com/alishanmao
Video Rating: / 5

A Scratch Built RC Plane for HD FPV cameras

A Scratch Built RC Plane for HD FPV cameras

Another video from www.mikeysrc.com

Little pet project of mine. I wanted to build a collapsible RC plane that I could take to remote locations to film interesting scenery. The first design was good but has some control issues I didn’t like. It carried the weight well but required too much pilot input to fly…..probably because the fuselage was too short for the wings. So I scaled up my Sport Trainer http://mikeysrc.com/Sport-Trainer.html design and put two motors on it on the sides so I could put the camera in the middle.

Stay tuned for more videos from cameras on board this plane.

Planes uses either one 2200mah 11.1V lopo or 2 1300mah 11.1V lipos.
2 1000KV motors,
2 10 X 6 GWS direct drive style props.
2 40 amp esc’s
4 servos

Music
Burble
Artist
BL Underwood

Canard FPV Scratch Built RC Plane for HD Video Cameras

visit WWW.MIKEYSRC.COM for PDF RC plane plans. Another scratch built RC plane specifically made to carry an HD high definition camera on board. Design was inspired by Burt Rutans Starship.
Video Rating: 4 / 5